Conference Kick-off / Introduction to Hydraulics
-
Hydraulics 101 - Back to the basics! Learn the principles of fluid power, including basics of operations, hydraulic applications and hydraulic system components.
Conference Kick-off / Hose Injection Safety Practices
-
The best way to prevent a hydraulic injury on-site is awareness. Hydraulic injuries can result in severe burns, amputation and in some cases death. This seminar will give an introduction to the importance of selecting the right hose, hydraulic hose safety, routing best practices, and hydraulic injection injuries.
~~~~~~~~~
*9:00-9:30 - SPECIAL ENHANCED CLASS FOR ON-SITE ATTENDEES - After the training, stay for a crimping demonstration. Learn how to properly inspect a hose assembly to make sure you have what you need to keep your people safe and your equipment running without leaks. Every student will produce a full ISO9000 rated hose assembly.*
How Air over Oil Cylinders Could be a Design Solution for Pressing, Piercing, or Clamping Applications vs. Traditional Hydraulic Systems
-
This class will consist of an introduction to hydro-pneumatic cylinders. Topics covered will include how hydro-pneumatic cylinders operate, the energy and efficiency savings and industrial applications where these cylinders are best suited to perform.
Basics of Machine Lubrication
-
In this class we will cover the basic lubrication ideas and a general overview of the types of systems in use in General Industry applications. This class will also cover component identification and basic troubleshooting techniques.
Statics and Dynamics in Linear Applications
-
In this course we will review the overall effects of both stationary loads on the system as well as when motion is applied to the load. We will do a quick overview of Newtonian fundamentals and how it applies to linear mechanical systems. Finally, we will review the effects of the application discussing the needs of motor and bearings requirements based on the motion in an illustration.
Intro to Servo Driven Hydraulic Systems
-
In this course, we will review how servo driven hydraulic system technology can increase your machines efficiency, system response, and reduce noise. Learn how to reduce energy consumption while maintaining high power density and precise control in your hydraulic system through real world examples.
Hose Basics
-
This course will cover the basics of Hose selection. Following the S.T.A.M.P procedure, you will learn how to identify hose size, temperature, application, media and pressure to determine the hose requirements for your applications. We will also cover hose crimping basics and an overview into the different hose types - from hydraulic, industrial to cut tube.
Pneumatic vs Electric Gripping – How the Choice Impacts your Application
-
The array of gripper choices in the automotive, pharmaceutical, electronics and consumer-goods industries for pick-and-place automation systems are numerous. The many gripper styles – all of which have their own size, method of operation, and required level of human interaction – is daunting. In this class, you will learn important variables to consider when choosing a gripper.
Optimizing Design and Hardware Costs for Multi-Axis Systems
-
Fangtooth experts will present the infinite ways to configure multi-axis systems to make Gantries, Lifts, Robot Transfer Units and more XX, XY, XZ, XYZ configurations. Explore the advantages and disadvantages of different drive units such as gear rack, belt drives, ball, planetary roller and acme screws. Gearbox optimization for servo selection will also be discussed.
Hydraulic Safety & Troubleshooting Techniques
-
This class will cover three main topics including system safety, troubleshooting techniques, and injection injuries. In the first topic, a hydraulic system is defined and actions that can be taken to maintain a safe operating system and environment are discussed. In the second topic, troubleshooting techniques are explored and a case study is worked through. Lastly, fluid injection injury prevention and the proper medical treatment in the case of an injury is covered.
Revolutionizing Machine I/O with the PCH Network Portal
-
The PCH Network Portal offers powerful multi-functional characteristics including flexible design, intuitive interfaces, and streamlined diagnostics. These benefits make for easy user integration, strong diagnostic capabilities, and the reduced cost of machinery architecture. Extensive configurability, secure Bluetooth diagnostics, and multiple zoning options innovations make the PCH Network Portal a revolutionary new tool in the network connectivity arena.
~~~~~~~~~ *12:00-12:30 - SPECIAL ENHANCED CLASS FOR ON-SITE ATTENDEES - After the training, stay to watch Parker’s pneumatic serial bus communication including remote I/O capabilities demonstration on-site.*
How to Increase Efficiency with Assembly Solutions
-
Learn how to outsource your repetitive & time-consuming tasks to increase efficiency & Profits! Assembly Solutions from Exotic Automation & Supply allows your highly skilled workers to be focused on what they do best instead of time-consuming, repetitive, manual projects.
From customized pre-assembled hose & fitting kits to tube bundling and on-site reverse engineering, learn the best ways to save time & efficiency.
80/20 – Build Your Idea
-
Bring your idea to life! 80/20 provides T-slot aluminum profiles, or bars that have channels used to connect other bars and parts to create custom solutions. In this session, we will introduce the T-Slot Aluminum Framing System and demonstrate how it is used with project examples from a variety of industries. A demonstration will be shown as well as a look into helpful online resources & tools.
Industrial Hose Introduction & STAMPED Overview
-
Establishing the difference between industrial hose and hydraulic hose, creating an awareness of the different applications, markets, and expectations. Breakdown of the STAMPED process to help in selecting the best hose for the application to maximize life expectancy, offer the best value, minimize maintenance costs, and provide a safe work environment. The last portion will review industrial hose ends and materials common through the different markets.
Selecting the Correct Air Compressor- Fixed Speed or Variable Speed?
-
The class will cover topics surrounding the selection of fixed speed vs. variable speed air compressors. What should be taken into consideration when making the selection? We’ll discuss part-load energy efficiencies, ambient condition installation parameters, potential utility rebates, and varying demand profiles to guide a facility to select the appropriate technology for the application.
High Pressure Industrial Hydraulic Tools
-
Learn the basics of high-pressure industrial hydraulic tools. In this course we will cover the dos & don'ts of basic system connections, basic hydraulic safety, common applications, and common product tools such as cylinders and pumps.
Drive Trains – One Size Does Not Fit All
-
In this class we will break down the elements of an electromechanical actuator, specifically looking at drive train technology. Should you utilize a belt or a screw drive train? Is your application best suited for a ball screw or a lead screw? What if we throw linear motors into the picture? We are going to break down the strengths & weaknesses of these technologies, as well as look at the calculations that help in actuator sizing.
Cobots, What Can They Do For You? All Your Questions Answered
-
Have you ever thought of adding a robot to your team? Collaborative Robots work safely around humans to complete everyday tasks. Join our panel of experts as they discuss the future of robots in the workplace, including what trends they are seeing, customer feedback and common robotic tasks and applications.
~~~~~~~~~ *1:00-1:30 - SPECIAL ENHANCED CLASS FOR ON-SITE ATTENDEES - After the training, stay to watch on-site demos of the Cobots and learn how to program for uses in your workplace.*
Compressors 101
-
This course includes an introductory discussion designed to teach facility personal, operators and maintenance staff how air compressors work, and how they effect the bottom line. Participants will learn how to calculate the energy cost of compressed air in their facility, identify inappropriate uses of compressed air, cost of leaks, better control compressed air to improve productivity and profitability.
Total System Health Management – Hydraulic Systems
-
Learn how to maximize your Hydraulic Systems overall health! In this class we will cover total health filtration management, including:
Diagnostics - combining sensors and diagnostic tools with circuit filtration and offline systems to receive real-life insight into changing system health.
Therapeutics - to extend the life of your fluid beyond routine drain and change intervals.
Preventative - to select the correct filtration to preserve the desired performance specifications of your system.
Modular End Effectors – What to Consider?
-
DESTACO’s end effector solutions are designed for a wide variety of applications and payloads and are designed to maximize productivity, both before and after installation. In this class, participants will learn what to consider when selecting end effectors, the flexibility of modifications to the end effectors and productivity results.
Hose & Injection Safety Practices
-
The best way to prevent a hydraulic injury on-site is awareness. Hydraulic injuries can result in severe burns, amputation and in some cases death. This seminar will give an introduction to the importance of selecting the right hose, hydraulic hose safety, routing best practices, and hydraulic injection injuries.
High Pressure Industrial Hydraulic Tools
-
Learn the basics of high-pressure industrial hydraulic tools. In this course we will cover the dos & don'ts of basic system connections, basic hydraulic safety, common applications, and common product tools such as cylinders and pumps.
The Basics of Mechanical Motion Control
-
Shock absorbers are used to de-accelerate loads and enable any mechanical device to operate smoothly and efficiently, resulting in longer life and reliability. In this class, we will review the different types of shock absorbers used for motion control. We will discuss the function of shocks and look at examples of real world applications.
Affordable Compact Progressive Lubrication Systems and Associated Components
-
The benefits of automated lubrication systems over traditional manual lubrication methods are numerous and undeniable. However, the introduction and implementation of automated lubrication systems can be a very expensive proposition and they are not always intuitive. This presentation will introduce the basic concept of a progressive lubrication system while focusing on the use of compact electrically operated pumps and single piece metering blocks. The result is a budget conscience automated system that is robust enough for most small to medium sized vehicles and general industrial applications. ~~~~~~~~~ *3:00-3:30 - SPECIAL ENHANCED CLASS FOR ON-SITE ATTENDEES - After the training, stay to learn about single point lubrication systems that can be managed by Bluetooth.*
Quick Couplings for EV Testing
-
Connect quick, connect safe & test fast. Ensuring all connection ports on the battery pack are sealed and leak-tight is very important to avoid the risk of contamination to battery cell. In this course, we will review the factors to consider when selecting quick connectors for electric vehicles. A look into solutions for battery coolant circuits and vent holes will be provided.
Basics of Hydraulic Filtration / Conference Closing
-
Fluids should always be filtered before being put to use. Proper filtration during use is critical to avoid costly contamination problems and will maximize your machine’s up-time. This informative class will filter out any confusion about how to keep your hydraulic systems clean and functioning properly. Topics covered include: Contamination basics (types, sources, etc.), fluid cleanliness standards / Filter media ratings, filter types & their applications and fluid analysis – a critical tool for any preventive maintenance program
Transair vs. Traditional Piping Applications & Installations / Conference Closing
-
This seminar will cover a brief Introduction into compressed air, including Parker Transair piping technologies and how they work, Transair vs. traditional systems, stainless steel solutions, common applications and where to get support information.
