RECENT POSTS
Archives
Thank you to all who attended this year’s Virtual Motion & Control Summit and congrats to the winners of our YETI Hopper Cooler giveaway!
Enerpac’s new Split-Flow Manifold improves safety, precision and control in lifting and lowering operations. The SFM-Series offer an economical solution for basic multi-point simultaneous lifting applications and enables a single operator to control a maximum of 4 lifting points from one manifold. Learn more here.
Built on Parker’s worldwide expertise in filtration, the OIL-X range has been developed to ensure consistent outstanding air quality, guaranteed for 12 months, and third-party validated to meet ISO 8573-1. Used for the removal of water and oil aerosols, atmospheric dirt and solid particles, rust, pipescale and micro-organisms, this filter has the lowest differential pressure on the market ensuring maximum efficiency and productivity.
Register today next week’s virtual Motion & Control Summit! The 2-day event is free to attend and full of motion & control, industrial hydraulics, fluid power safety & pneumatic content with special guest speaker, NHRA driver John Force! Register Here!
Day 1
Wednesday, February 17th Agenda:
8:00 – 8:10am: Conference Kick-Off
8:10 – 9:00am: Fluid Power Safety & Productivity
9:00 – 10:00am: Hose & Injection Safety Practices
10:00 – 11:00am: Maintaining Hydraulic System Fluid for Extended Component Life
11:00 – 12:00pm: Important Basics of Finite Filtration
12:00 – 1:00pm: The Challenges of Building the Largest Hydraulic Power Unit
1:00 – 2:00pm: Special Keynote Speaker: NHRA Driver, John Force
2:00 – 3:00pm: How To Apply Lubrication Systems to Achieve Cost Savings
3:00 – 3:50pm: How to Choose Rubber or Polyurethane for Specific Applications
3:50 – 4:00pm: Conference Closing*
Day 2
Thursday, February 18th Agenda:
8:00 – 810am: Conference Kick-Off
8:10 – 9:00am: Should you Automate?
9:00 – 10:00am: How Do You Ensure Machine Uptime?
10:00 – 11:00am: Savings with Parker Transair vs. Traditional Piping systems
11:00 – 12:00pm: Spin-On Mobile Baldwin Filters
12:00 – 1:00pm: Using Proper Hydraulic & Pneumatic Tools in Bolting Applications
1:00 – 2:00pm: Shock Absorbers – Why Use Them?
2:00 – 3:00pm: When to Choose a Hose Over a Tube Assembly
3:00 – 3:50pm: Intro to Nitrogen Generators
3:50 – 4:00pm: Conference Closing*
*We’re giving away 6 YETI Hopper Coolers to attendees and the lucky winners will be announced on 2/17 & 2/18 during the show closings. Attendees will receive an entry to win for each session they attend throughout the show. The more sessions attended, the more entries received. You do not need to be present to win. A representative from Exotic Automation & Supply will reach out to the winners after the conference.
NEW HUDSON, MICH. (PRWEB) JANUARY 13, 2021
Exotic Automation & Supply, a premier Parker Hannifin distributor announced today they have released the agenda for the first annual 2021 Motion & Control Summit. The conference, slated to be held virtually on February 17-18th, 2021, features an extensive line-up of fluid power seminars.
The 2-day event features 16 sessions with topics including fluid power safety & productivity, ensuring machine uptime, tube vs. hose assemblies, automation basics, proper machine use, maintaining hydraulic system fluid for extended component life and more.
“Although we are unable to meet in person, we are proud to offer a line-up of informative courses for show attendees virtually,” Steve Orlando, Vice President of Sales & Marketing said. “The show is packed with a wide variety of classes that attendees will find helpful & enlightening.”
Special keynote speaker, NHRA champion driver John Force, will take the stage in a special session on Wednesday, February 17th at 1:00pm. Force will discuss some of his greatest racing accomplishments as well as interact with show attendees in a Q & A session.
Mike Chapman, Exotic’s Business Unit Manager will be leading the session with Force. “John Force has earned over 151 career wins and is a 21-time champion car owner,” Chapman said. “We are happy to have him be a part of the conference and I am really looking forward to our discussion.”
All attendees will receive a mystery show grab bag mailed to them as well as an entry to win one of six YETI coolers. The Motion & Control Summit is free to attend. Additional show information & registration can be found at: https://wordpress-227745-4539170.cloudwaysapps.com/mcsummit.
About Exotic Automation & Supply: Exotic Automation & Supply was founded in 1963 and has grown to become one of Parker Hannifin’s largest distributors in the United States. Exotic’s headquarters is located in New Hudson, Michigan. The company maintains full-service centers throughout Michigan & Indiana with locations in Ann Arbor, Freeland (Saginaw), Lansing, Taylor, Flint, Indianapolis, Jackson, Livonia, Noblesville, Rochester Hills, Shelby Township as well as at the main New Hudson complex.
Parker’s PCH Network Portal is a new approach to ethernet communication modules that redefines and revolutionizes machine I/O architecture (inputs and outputs). As an ethernet node with IO-Link master capability that supports multiple Industrial Ethernet communication protocols (EtherNet/IP, PROFINET, Modbus TCP and EtherCAT), the PCH Network Portal can communicate with many industrial controllers used in the automation industry.
Enerpac’s New HMT Series is a range of fast, durable, modular and interchangeable hydraulic torque wrenches, enabling you to tackle almost any bolting application.
Interchange cassettes with ease, switching the HLP low profile hexagon cassette with the HSQ square drive whenever your applications demands. This enables a wide range of bolting applications to be tackled with fewer tools, lowering capital expenditure significantly. Learn more here.
Since 1963, Exotic Automation & Supply has been manufacturing custom polyurethane products for best-in-class durability and performance. Our Solid Cast Polyurethane (PU) manufacturing process is widely preferred as the material of choice in applications where a high degree of load bearing, abrasion resistance and tear strength are important. Learn more here.
Accessories for 80/20 Aluminum Framing
80/20 offers several accessory options to customize your aluminum framing including colored t-slot covers, lighting, storage bins, tool hangers, wire management & more! Learn more here.
SKF Progressive Lubrication Systems
SKF Progressive Lubrication Systems provide continuous lubrication as long as the pump is in operation. Once the pump stops, the pistons of the progressive metering device will stop in their
New Parker Gold Cup Sizing Tool & References
Parker Hydraulics has launched a new website with a sizing tool to help you identify the best fit pump and motor for your application. The site also features tutorial videos, success stories,
Parker Pneumatic Flow Control Valves
Parker’s line of Pneumatic Flow Controls offer precise adjustments, accuracy, and compactness to meet any application. Pneumatic flow controls are available in composite, brass, nickel plated brass, and stainless steel and
A Weldless, Threadless Way to Join Pipe & Tube
The PYPLOK® connecting system is a weld-less, thread-less way to join pipe. Using a portable, hand-held installation tool, couplings are cold worked and permanently compressed onto the piping, forming a permanent leak-tight
Happy Thanksgiving!
Happy Thanksgiving from all of us at Exotic Automation & Supply! This season and always, we are thankful for you and wish you and your family a Happy Thanksgiving! In observance
Air Audits from Exotic Air Systems
Do you know how clean your system is? An air audit is a valuable process for industries relying on compressed air systems, offering insights that lead to better efficiencies, cost savings
Perma Single-Point Lubrication Systems
Perma’s Star Vario Long Range is used for single-point lubrication of roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals and chains. The unit’s precise lubricant metering makes it ideal for
O.M.LER AF1470 Decoring Hammer
OMLER Pneumatic Sand Decoring Hammers combine high quality with performance to remove sand or ceramic from aluminum and grey iron castings. O.M.LER’s AF1470 Hammer is 25% lighter due to its aluminum
80/20 IdeaBuilder Software
With the ability to design in minutes, 80/20’s IdeaBuilder can be used by designers of any experience level. It’s as simple as selecting a profile, clicking and dragging. Web-based –
Parker QuickFit Oil Change System
Change your oil in just 3 easy steps in under 30 minutes! Parker’s QuickFit Oil Change System is easy to install and provides a cleaner and safer oil change process for engines
You’re Invited to Our Grand Rapids Open House!
Join us Thursday, October 24th from 11:00am – 1:00pm at our newly remodeled Grand Rapids – Scribner location for our Open House featuring product demos, giveaways and lunch catered from
