RECENT POSTS
Archives
Thank you to all who attended this year’s Virtual Motion & Control Summit and congrats to the winners of our YETI Hopper Cooler giveaway!
Enerpac’s new Split-Flow Manifold improves safety, precision and control in lifting and lowering operations. The SFM-Series offer an economical solution for basic multi-point simultaneous lifting applications and enables a single operator to control a maximum of 4 lifting points from one manifold. Learn more here.
Built on Parker’s worldwide expertise in filtration, the OIL-X range has been developed to ensure consistent outstanding air quality, guaranteed for 12 months, and third-party validated to meet ISO 8573-1. Used for the removal of water and oil aerosols, atmospheric dirt and solid particles, rust, pipescale and micro-organisms, this filter has the lowest differential pressure on the market ensuring maximum efficiency and productivity.
Register today next week’s virtual Motion & Control Summit! The 2-day event is free to attend and full of motion & control, industrial hydraulics, fluid power safety & pneumatic content with special guest speaker, NHRA driver John Force! Register Here!
Day 1
Wednesday, February 17th Agenda:
8:00 – 8:10am: Conference Kick-Off
8:10 – 9:00am: Fluid Power Safety & Productivity
9:00 – 10:00am: Hose & Injection Safety Practices
10:00 – 11:00am: Maintaining Hydraulic System Fluid for Extended Component Life
11:00 – 12:00pm: Important Basics of Finite Filtration
12:00 – 1:00pm: The Challenges of Building the Largest Hydraulic Power Unit
1:00 – 2:00pm: Special Keynote Speaker: NHRA Driver, John Force
2:00 – 3:00pm: How To Apply Lubrication Systems to Achieve Cost Savings
3:00 – 3:50pm: How to Choose Rubber or Polyurethane for Specific Applications
3:50 – 4:00pm: Conference Closing*
Day 2
Thursday, February 18th Agenda:
8:00 – 810am: Conference Kick-Off
8:10 – 9:00am: Should you Automate?
9:00 – 10:00am: How Do You Ensure Machine Uptime?
10:00 – 11:00am: Savings with Parker Transair vs. Traditional Piping systems
11:00 – 12:00pm: Spin-On Mobile Baldwin Filters
12:00 – 1:00pm: Using Proper Hydraulic & Pneumatic Tools in Bolting Applications
1:00 – 2:00pm: Shock Absorbers – Why Use Them?
2:00 – 3:00pm: When to Choose a Hose Over a Tube Assembly
3:00 – 3:50pm: Intro to Nitrogen Generators
3:50 – 4:00pm: Conference Closing*
*We’re giving away 6 YETI Hopper Coolers to attendees and the lucky winners will be announced on 2/17 & 2/18 during the show closings. Attendees will receive an entry to win for each session they attend throughout the show. The more sessions attended, the more entries received. You do not need to be present to win. A representative from Exotic Automation & Supply will reach out to the winners after the conference.
NEW HUDSON, MICH. (PRWEB) JANUARY 13, 2021
Exotic Automation & Supply, a premier Parker Hannifin distributor announced today they have released the agenda for the first annual 2021 Motion & Control Summit. The conference, slated to be held virtually on February 17-18th, 2021, features an extensive line-up of fluid power seminars.
The 2-day event features 16 sessions with topics including fluid power safety & productivity, ensuring machine uptime, tube vs. hose assemblies, automation basics, proper machine use, maintaining hydraulic system fluid for extended component life and more.
“Although we are unable to meet in person, we are proud to offer a line-up of informative courses for show attendees virtually,” Steve Orlando, Vice President of Sales & Marketing said. “The show is packed with a wide variety of classes that attendees will find helpful & enlightening.”
Special keynote speaker, NHRA champion driver John Force, will take the stage in a special session on Wednesday, February 17th at 1:00pm. Force will discuss some of his greatest racing accomplishments as well as interact with show attendees in a Q & A session.
Mike Chapman, Exotic’s Business Unit Manager will be leading the session with Force. “John Force has earned over 151 career wins and is a 21-time champion car owner,” Chapman said. “We are happy to have him be a part of the conference and I am really looking forward to our discussion.”
All attendees will receive a mystery show grab bag mailed to them as well as an entry to win one of six YETI coolers. The Motion & Control Summit is free to attend. Additional show information & registration can be found at: https://wordpress-227745-4539170.cloudwaysapps.com/mcsummit.
About Exotic Automation & Supply: Exotic Automation & Supply was founded in 1963 and has grown to become one of Parker Hannifin’s largest distributors in the United States. Exotic’s headquarters is located in New Hudson, Michigan. The company maintains full-service centers throughout Michigan & Indiana with locations in Ann Arbor, Freeland (Saginaw), Lansing, Taylor, Flint, Indianapolis, Jackson, Livonia, Noblesville, Rochester Hills, Shelby Township as well as at the main New Hudson complex.
Parker’s PCH Network Portal is a new approach to ethernet communication modules that redefines and revolutionizes machine I/O architecture (inputs and outputs). As an ethernet node with IO-Link master capability that supports multiple Industrial Ethernet communication protocols (EtherNet/IP, PROFINET, Modbus TCP and EtherCAT), the PCH Network Portal can communicate with many industrial controllers used in the automation industry.
Enerpac’s New HMT Series is a range of fast, durable, modular and interchangeable hydraulic torque wrenches, enabling you to tackle almost any bolting application.
Interchange cassettes with ease, switching the HLP low profile hexagon cassette with the HSQ square drive whenever your applications demands. This enables a wide range of bolting applications to be tackled with fewer tools, lowering capital expenditure significantly. Learn more here.
Since 1963, Exotic Automation & Supply has been manufacturing custom polyurethane products for best-in-class durability and performance. Our Solid Cast Polyurethane (PU) manufacturing process is widely preferred as the material of choice in applications where a high degree of load bearing, abrasion resistance and tear strength are important. Learn more here.
Register for 1st Quarter Training Classes!
We are excited to announce a full line-up of training and development courses for the 1st quarter! Training is free and offered from 1:00pm-2:30pm. Don’t miss our new Transair Aluminum
Have Your Tried Parker’s Virtual Engineer?
Parker’s Virtual Engineer is an innovative design tool for linear motion applications in automation. Save engineering time in three simple steps: Enter application details using the intuitive interface Size and
Parker QuickFit™ Oil Change System
You expect the best from your machinery, and maintaining engine oil is key to maximizing the productive life of equipment. Changing oil sounds simple, but we know the process can
Enerpac LG-Series Lock-Grip Pullers
Enerpac’s new lock-grip pullers provide a simple, safe and cost-effective way to remove shaft-mounted parts. Both mechanical and hydraulic pullers are offered to suit your application requirements. Key Features: Convenient
Happy Holidays
There is no better time than the holidays to express our appreciation for your business! We wish you and your family a happy and joyous holiday season and extend our
Power Clamping & Locating
DESTACO’s Pneumatic Power Clamps range from heavy-duty sealed clamps for welding environments to compact light-duty clamps for a variety of clamping, gripping applications. Pin clamps and pivot units are used in
End Effectors & Vacuum Products
DESTACO end effectors are designed to help you move parts faster in today’s production line by using high strength, lightweight aluminum modular components, durable vacuum cups and the fastest venturis on
Manual & Pneumatic Clamps
DESTACO manual and pneumatic light-duty clamps are built to last for years of service and designed to keep your work pieces in place. Manual and light-duty clamps are offered in a
Robohand Gripping Solutions
Since 1980 with the release of its patented series of parallel grippers, the Robohand name has come to represent the best in innovation, quality and reliability. Gripping Solutions Include: Standard
Sidener Engineering is now an Authorized DESTACO Distributor!
We are proud to announce we are now an authorized DESTACO distributor! You can now count on Sidener Engineering for high performance DESTACO Robohand grippers, rotaries, slides, manual & pneumatic
3 Ways to Adopt Advances in Pneumatic Valve Technology
Pneumatic valves have come a long way since the development of the compressor more than a century ago and it can be a real challenge to ensure you’re taking full
Learn How to Make Your Predictive Maintenance “Smarter”
With the onset of Industry 4.0, factory and production environments are adopting industrial networks to become more connected and intelligent. Adding intelligence to machines gives the opportunity to implement a
