Gore GR Sheet Gasketing is designed to outperform both conventional (filled and skived) PTFE and other ePTFE gasketing in steel piping and equipment. It has the chemical resistance of conventional PTFE sheet gasketing without the creek and cold flow commonly associated with that material. Gore GR Sheet Gasketing is stronger and has more dimensional stability than other ePTFE gaskets. It is highly conformable to rough or irregular sealing surfaces and compresses into an extremely tough gasket that creates a tight, long-lasting seal.

Machine designers are increasingly turning to gearheads to take advantage of the latest advances in servo motor technology. Essentially, a gearhead converts high-speed, low-torque energy into low-speed, high-torque output. A servo motor provides highly accurate positioning of its output shaft. When these two devices are paired with on another, they enhance each other’s strengths, providing controlled motion that is precise, robust and reliable.

Interested in learning about the different gearheads available and how to make the right selection? Click Here

OMLER Pneumatic Sand De-Coring Hammers combine high quality with performance to remove sand or ceramic from aluminum and grey iron castings. Several hammer models are available to fit your application. Sidener is OMLER’s exclusive US distributor and offers in-stock inventory as well as repair services and application assistance.

We are excited to announce a full line-up of training and development courses for the 1st quarter! Training is free and offered from 1:00pm-2:30pm. Don’t miss our new Transair Aluminum Piping class offered in March at all training facilities.

Ann Arbor Class Offerings

Thursday, March 14th @ 1:00-2:30pm
Industrial Lubrication Practices – Register Here
Moving parts on your machinery & equipment require proper lubrication to maximize uptime and ensure long life. We’ll discuss several lubrication concepts and the available equipment needed to provide just the right amount of lubrication.

Thursday, March 28th @ 1:00-2:30pm
Basics of Hydraulic Filtration for Greater Machine Up-time – Register Here
Proper filtration during use is critical to avoid costly contamination problems and will maximize your machine’s up-time. This informative class will filter out any confusion about how to keep your hydraulic systems clean and functioning properly.

Thursday, March 21st @ 1:00-2:30pm
Transair Aluminum Piping for Compressed Air, Vacuum and Inert Gas Applications – Register Here
Transair’s lightweight components and quick-connect interlocking design allow for easy and immediate layout modifications and require no need to thread, solder, or glue pipe. In this course, we will cover the how to properly size your system, the differences between aluminum and black pipe and potential cost savings.

Farmington Class Offerings

Thursday, February 14th @ 1:00-2:30pm
Cylinder Sizing Fundamentals – Register Here
Choosing the correct cylinder is key to your motion-control solution. In this session we will cover basic terminology & sizing formulas, cylinder types and their applications, how to identify misapplications and more.

Thursday, March 7th @ 1:00-2:30pm
Alternative Fuel Conversion Basics – Register Here
Why natural gas? Fleet Managers across the world have made the switch from gasoline to CNG / LPG to lower costs and increase efficiencies. This course will focus on the components required for conversion, government incentives and focused case studies.

Wednesday, March 20th @ 1:00-2:30pm
Transair Aluminum Piping for Compressed Air, Vacuum and Inert Gas Applications  – Register Here
Transair’s lightweight components and quick-connect interlocking design allow for easy and immediate layout modifications and require no need to thread, solder, or glue pipe. In this course, we will cover the how to properly size your system, the differences between aluminum and black pipe and potential cost savings.

Shelby Class Offerings

Thursday, January 31st @ 1:00-2:30pm
Hydraulic Accumulators: What are They & How Do They Work? – Register Here
Accumulators regulate the performance of a hydraulic system by providing an additional volume of system fluid, pressurized by an external gas supply. For industrial applications, there are three types of hydro-pneumatic accumulators: piston, bladder and diaphragm. We’ll help you understand each type so you can choose the best solution for your system.

Thursday, February 7th @ 1:00-2:30pm
Hose Assembly & Crimping Techniques – Register Here
Not all Hoses are created equal and, more importantly, not all Crimps are the same. Safety is first priority and we will teach you how to properly inspect a hose assembly to make sure you have what you need to keep your people safe and your equipment running without leaks.

Thursday, February 28th @ 1:00-2:30pm
Thread ID & Safety Works – Register Here
Identifying thread types in industrial applications can be very confusing. This class will show you how to identify SAE, NPT, Metric & BSP thread types and will discuss hydraulic systems best safety practices.

Tuesday, March 19th @ 1:00-2:30pm – Register Here
Transair Aluminum Piping for Compressed Air, Vacuum and Inert Gas Applications
Transair’s lightweight components and quick-connect interlocking design allow for easy and immediate layout modifications and require no need to thread, solder, or glue pipe. In this course, we will cover the how to properly size your system, the differences between aluminum and black pipe and potential cost savings.

Lansing Class Offerings

Thursday, February 21st @ 1:00-2:30pm
Pneumatic Valve Application and Communication Protocols – Register Here
Pneumatic technology has progressed tremendously in the past several years. We will walk you through the various protocol options and teach you how to choose the right (not always the newest) interface and valves for your machine!

Friday, March 22nd @ 1:00-2:30pm
Transair Aluminum Piping for Compressed Air, Vacuum and Inert Gas Applications – Register Here
Transair’s lightweight components and quick-connect interlocking design allow for easy and immediate layout
modifications and require no need to thread, solder, or glue pipe. In this course, we will cover the how to properly size your system, the differences between aluminum and black pipe and potential cost savings.

Parker’s Virtual Engineer is an innovative design tool for linear motion applications in automation. Save engineering time in three simple steps:

• Enter application details using the intuitive interface
• Size and select products that meet the demands of your application
• Get a quote, share your project, and download files easily

Check out the program here

You expect the best from your machinery, and maintaining engine oil is key to maximizing the productive life of equipment. Changing oil sounds simple, but we know the process can be complicated, messy and dangerous.

Fast. Clean. Safe.
Parker’s new QuickFit Oil Change System is a complete oil change system that revolutionizes the process with a faster, cleaner and safer way to change oil in engines and machines. In three easy steps, purge, extract and refill your system with new oil without ever spilling a drop. Click here to learn more.

Enerpac’s new lock-grip pullers provide a simple, safe and cost-effective way to remove shaft-mounted parts. Both mechanical and hydraulic pullers are offered to suit your application requirements.

Key Features:

• Convenient adjustment handle simplifies the position of jaws on application and increases speed of operation
• Locking mechanism helps prevent jaws from slipping off application while pulling
• Greater spreading width on jaws enables use on thicker objects
• Spindle protector helps prevent damage to spindle when pulling against a flat surface

Learn more here

There is no better time than the holidays to express our appreciation for your business! We wish you and your family a happy and joyous holiday season and extend our sincere thanks for your support this year.

DESTACO’s Pneumatic Power Clamps range from heavy-duty sealed clamps for welding environments to compact light-duty clamps for a variety of clamping, gripping applications. Pin clamps and pivot units are used in locating and positioning applications. All of these products offer exceptional clamping forces, holding capacities and durability.

DESTACO end effectors are designed to help you move parts faster in today’s production line by using high strength, lightweight aluminum modular components, durable vacuum cups and the fastest venturis on the market.

DESTACO manual and pneumatic light-duty clamps are built to last for years of service and designed to keep your work pieces in place. Manual and light-duty clamps are offered in a variety of styles to hold a part securely in place during an application.

Since 1980 with the release of its patented series of parallel grippers, the Robohand name has come to represent the best in innovation, quality and reliability.

Gripping Solutions Include:

• Standard & Precision Pneumatic Grippers
• Maintenance-Free Electric Grippers
• Clean Room, Food and Automotive Grippers
• High Quality Linear Actuators (Slides)
• Full line of Pneumatic Rotary Actuators (Rotaries)
• Automatic Full-Sensing Robotic Arm Tool Changers