OMLER Pneumatic Sand De-Coring Hammers combine high quality with performance to remove sand or ceramic from aluminum and grey iron castings. Several hammer models are available to fit your application. Sidener is OMLER’s exclusive US distributor and offers in-stock inventory as well as repair services and application assistance.

We are excited to announce a full line-up of training and development courses for the 1st quarter! Training is free and offered from 1:00pm-2:30pm. Don’t miss our new Transair Aluminum Piping class offered in March at all training facilities.

Ann Arbor Class Offerings

Thursday, March 14th @ 1:00-2:30pm
Industrial Lubrication Practices – Register Here
Moving parts on your machinery & equipment require proper lubrication to maximize uptime and ensure long life. We’ll discuss several lubrication concepts and the available equipment needed to provide just the right amount of lubrication.

Thursday, March 28th @ 1:00-2:30pm
Basics of Hydraulic Filtration for Greater Machine Up-time – Register Here
Proper filtration during use is critical to avoid costly contamination problems and will maximize your machine’s up-time. This informative class will filter out any confusion about how to keep your hydraulic systems clean and functioning properly.

Thursday, March 21st @ 1:00-2:30pm
Transair Aluminum Piping for Compressed Air, Vacuum and Inert Gas Applications – Register Here
Transair’s lightweight components and quick-connect interlocking design allow for easy and immediate layout modifications and require no need to thread, solder, or glue pipe. In this course, we will cover the how to properly size your system, the differences between aluminum and black pipe and potential cost savings.

Farmington Class Offerings

Thursday, February 14th @ 1:00-2:30pm
Cylinder Sizing Fundamentals – Register Here
Choosing the correct cylinder is key to your motion-control solution. In this session we will cover basic terminology & sizing formulas, cylinder types and their applications, how to identify misapplications and more.

Thursday, March 7th @ 1:00-2:30pm
Alternative Fuel Conversion Basics – Register Here
Why natural gas? Fleet Managers across the world have made the switch from gasoline to CNG / LPG to lower costs and increase efficiencies. This course will focus on the components required for conversion, government incentives and focused case studies.

Wednesday, March 20th @ 1:00-2:30pm
Transair Aluminum Piping for Compressed Air, Vacuum and Inert Gas Applications  – Register Here
Transair’s lightweight components and quick-connect interlocking design allow for easy and immediate layout modifications and require no need to thread, solder, or glue pipe. In this course, we will cover the how to properly size your system, the differences between aluminum and black pipe and potential cost savings.

Shelby Class Offerings

Thursday, January 31st @ 1:00-2:30pm
Hydraulic Accumulators: What are They & How Do They Work? – Register Here
Accumulators regulate the performance of a hydraulic system by providing an additional volume of system fluid, pressurized by an external gas supply. For industrial applications, there are three types of hydro-pneumatic accumulators: piston, bladder and diaphragm. We’ll help you understand each type so you can choose the best solution for your system.

Thursday, February 7th @ 1:00-2:30pm
Hose Assembly & Crimping Techniques – Register Here
Not all Hoses are created equal and, more importantly, not all Crimps are the same. Safety is first priority and we will teach you how to properly inspect a hose assembly to make sure you have what you need to keep your people safe and your equipment running without leaks.

Thursday, February 28th @ 1:00-2:30pm
Thread ID & Safety Works – Register Here
Identifying thread types in industrial applications can be very confusing. This class will show you how to identify SAE, NPT, Metric & BSP thread types and will discuss hydraulic systems best safety practices.

Tuesday, March 19th @ 1:00-2:30pm – Register Here
Transair Aluminum Piping for Compressed Air, Vacuum and Inert Gas Applications
Transair’s lightweight components and quick-connect interlocking design allow for easy and immediate layout modifications and require no need to thread, solder, or glue pipe. In this course, we will cover the how to properly size your system, the differences between aluminum and black pipe and potential cost savings.

Lansing Class Offerings

Thursday, February 21st @ 1:00-2:30pm
Pneumatic Valve Application and Communication Protocols – Register Here
Pneumatic technology has progressed tremendously in the past several years. We will walk you through the various protocol options and teach you how to choose the right (not always the newest) interface and valves for your machine!

Friday, March 22nd @ 1:00-2:30pm
Transair Aluminum Piping for Compressed Air, Vacuum and Inert Gas Applications – Register Here
Transair’s lightweight components and quick-connect interlocking design allow for easy and immediate layout
modifications and require no need to thread, solder, or glue pipe. In this course, we will cover the how to properly size your system, the differences between aluminum and black pipe and potential cost savings.

Parker’s Virtual Engineer is an innovative design tool for linear motion applications in automation. Save engineering time in three simple steps:

• Enter application details using the intuitive interface
• Size and select products that meet the demands of your application
• Get a quote, share your project, and download files easily

Check out the program here

You expect the best from your machinery, and maintaining engine oil is key to maximizing the productive life of equipment. Changing oil sounds simple, but we know the process can be complicated, messy and dangerous.

Fast. Clean. Safe.
Parker’s new QuickFit Oil Change System is a complete oil change system that revolutionizes the process with a faster, cleaner and safer way to change oil in engines and machines. In three easy steps, purge, extract and refill your system with new oil without ever spilling a drop. Click here to learn more.

Enerpac’s new lock-grip pullers provide a simple, safe and cost-effective way to remove shaft-mounted parts. Both mechanical and hydraulic pullers are offered to suit your application requirements.

Key Features:

• Convenient adjustment handle simplifies the position of jaws on application and increases speed of operation
• Locking mechanism helps prevent jaws from slipping off application while pulling
• Greater spreading width on jaws enables use on thicker objects
• Spindle protector helps prevent damage to spindle when pulling against a flat surface

Learn more here

There is no better time than the holidays to express our appreciation for your business! We wish you and your family a happy and joyous holiday season and extend our sincere thanks for your support this year.

DESTACO’s Pneumatic Power Clamps range from heavy-duty sealed clamps for welding environments to compact light-duty clamps for a variety of clamping, gripping applications. Pin clamps and pivot units are used in locating and positioning applications. All of these products offer exceptional clamping forces, holding capacities and durability.

DESTACO end effectors are designed to help you move parts faster in today’s production line by using high strength, lightweight aluminum modular components, durable vacuum cups and the fastest venturis on the market.

DESTACO manual and pneumatic light-duty clamps are built to last for years of service and designed to keep your work pieces in place. Manual and light-duty clamps are offered in a variety of styles to hold a part securely in place during an application.

Since 1980 with the release of its patented series of parallel grippers, the Robohand name has come to represent the best in innovation, quality and reliability.

Gripping Solutions Include:

• Standard & Precision Pneumatic Grippers
• Maintenance-Free Electric Grippers
• Clean Room, Food and Automotive Grippers
• High Quality Linear Actuators (Slides)
• Full line of Pneumatic Rotary Actuators (Rotaries)
• Automatic Full-Sensing Robotic Arm Tool Changers

We are proud to announce we are now an authorized DESTACO distributor! You can now count on Sidener Engineering for high performance DESTACO Robohand grippers, rotaries, slides, manual & pneumatic clamps and end effector solutions.

DESTACO is considered the worldwide leader in the design, manufacturing and support of clamping, gripping, transferring and robotic tooling solutions for workplace and flexible automation needs. The company offers a vast range of industrial robotic gripping solutions for precise parts handling and pick and place capabilities.

Pneumatic valves have come a long way since the development of the compressor more than a century ago and it can be a real challenge to ensure you’re taking full advantage of the latest development for your organization. Here are three ways to adopt the latest advances in pneumatic valve technology…

1. Choose components that adhere to ISO valve standards
   ISO International Standards ensure that products are safe, reliable and of good quality, helping to deliver increased customer satisfaction through consistent quality. ISO standards can also be used strategically by businesses to help reduce costs through improved systems and processes, minimize waste and increase productivity.
2. Opt for intelligent and simple wiring solutions
   Utilizing collective wiring solutions provides and elegant mechanism to consolidate solenoid wiring into a single “collective” connection on the valve manifold. This method significantly reduces costs and complexity, as the valve can be moved out of the control cabinet to the point-of-use application located near the pneumatic process, eliminating long tubing runs and delayed responses in operation.
3. Incorporate cloud-connected innovations
   Incorporating a fieldbus solutions to control pneumatic valves could be the first step towards implementing intelligent, cloud-connected industry 4.0 innovations on the assembly line. These solutions create an automated industrial network, specifically designed for communications between programmable logic controls (PLCs) via a communications system such as Ethernet.

Read the full blog post here.